Beaucoup de gens trouvent difficile à passer le test Microsoft 074-353, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test Microsoft 074-353 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.
Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Microsoft 070-504 très tôt. Pass4Test peut vous permettre à réussir 100% le test Microsoft 070-504, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.
Le test Microsoft 074-353 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Microsoft 074-353 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Microsoft 074-353.
Code d'Examen: 074-353
Nom d'Examen: Microsoft (Windows UX Design)
Questions et réponses: 102 Q&As
Code d'Examen: 070-504
Nom d'Examen: Microsoft (TS: Microsoft .NET Framework 3.5 -C Windows Workflow Foundation)
Questions et réponses: 176 Q&As
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Microsoft 074-353. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Pass4Test a une grande équipe composée des experts d'expérience dans l'industrie IT. Leurs connaissances professionnelles et les recherches font une bonne Q&A, qui vous permet à passer le test Microsoft 070-504. Dans Pass4Test, vous pouvez trouver une façon plus convenable à se former. Les resources de Pass4Test sont bien fiable. Choisissez Pass4Test, choisissez un raccourci à réussir le test Microsoft 070-504.
C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.
Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.
070-504 Démo gratuit à télécharger: http://www.pass4test.fr/070-504.html
NO.1 Question
You create an application in which users design simple sequential workflows. The designs are stored as
XOML in a SQL database. You need to start one of these sequential workflows from within your own
workflow.
What should you do?
A. Include a custom activity with a code segment that includes an invocation to the CreateWorkflow
method of the WorkflowRuntime class and then starts the workflow. The signature of the CreateWorkflow
method invoked uses only the workflowType parameter.
B. Include a custom activity with a code segment that includes an invocation to the CreateWorkflow
method of WorkflowRuntime class and then starts the workflow. The signature of the CreateWorkflow
method invoked uses only the XmlReader and workflowDefinitionReader parameters.
C. Include a custom activity with a code segment that includes an invocation to the CreateWorkflow
method of the WorkflowRuntime class and then starts the workflow. The signature of the CreateWorkflow
method invoked uses only the workflowType, Dictionary<string,Object> namedArgumentValues, and Guid
instanceId parameters.
D. Include and configure an InvokeWorkflow activity
Answer: B
Microsoft examen 070-504 070-504
NO.2 Question
A custom activity defined in an assembly named LitwareActivities is defined as follows:
namespace LitwareActivities
{
public class WriteLineActivity : Activity
{
protected override ActivityExecutionStatus Execute(ActivityExecutionContext executionContext)
{
Console.WriteLine(Message);
return ActivityExecutionStatus.Closed;
}
private string _message;
public string Message
{
get { return _message; }
set { _message = value; }
}
...
}
}
You need to create a sequential workflow where the execution path can be generated on the fly by an
application.
Which XML code segment should you use?
A. <SequentialWorkflowActivity
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/workflow"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</SequentialWorkflowActivity>
B. <Workflow
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/workflow"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</Workflow>
C. <Workflow
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
class:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</Workflow>
D. <SequentialWorkflowActivity
class:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</SequentialWorkflowActivity>
Answer: A
Microsoft certification 070-504 certification 070-504
NO.3 Question
You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5. The
application uses a sequential workflow.
The host application creates a workflow instance and stores it in a variable named instance. When the
workflow is executed, a business requirement requires the workflow execution to pause for a few minutes.
The host uses the following code segment.
Dim runtime As New WorkflowRuntime()
Dim instance As WorkflowInstance = _
?runtime.CreateWorkflow(GetType(MyWorkflow))
instance.Start()
You need to ensure that the following requirements are met:
The workflow execution is temporarily pauseD. The workflow state is preserved in memory.
Which line of code should you use?
A. instance.Unload()
B. instance.TryUnload()
C. instance.Suspend(Nothing)
D. instance.Terminate(Nothing)
Answer: C
Microsoft examen 070-504 examen certification 070-504 certification 070-504
NO.4 Question
You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5.
A Windows Forms application functions as the workflow host by using the
DefaultWorkflowSchedulerService.
You create a WorkflowRuntime instance in the Load event of the forms. You also subscribe to the
WorkflowCompleted event.
You need to ensure that the application displays the message in the Label control named lblStatus when
the WorkflowCompleted event is raised.
Which code segment should you use?
A. private void UpdateInstances(Guid id) {
??if (this.InvokeRequired) {
????lblStatus.Text = id + " completed";
??}
}
B. private void UpdateInstances(Guid id) {
??if (!this.InvokeRequired) {
????lblStatus.Text = id + " completed";
??}
}
C. delegate void UpdateInstancesDelegate(Guid id);
private void UpdateInstances(Guid id) {
??if (this.InvokeRequired) {
????this.Invoke(
?????new UpdateInstancesDelegate(UpdateInstances),
?????new object[] { id });
??} else {
????lblStatus.Text = id + " completed";
??}
}
D. delegate void UpdateInstancesDelegate(Guid id);
private void UpdateInstances(Guid id) {
??if (!this.InvokeRequired) {
????this.Invoke(
?????new UpdateInstancesDelegate(UpdateInstances),
?????new object[] { id });
??} else {
????lblStatus.Text = id + " completed";
??}
}
Answer: C
Microsoft examen certification 070-504 070-504
NO.5 Question
You create a workflow host application by using Microsoft .NET Framework 3.5. You use Windows
Workflow Foundation to create the application.
You need to configure the workflow runtime to ensure that all the workflow instances run asynchronously.
Which code segment should you use?
A. WorkflowRuntime runtime = new WorkflowRuntime();
runtime.StartRuntime();
WorkflowInstance instance =
?runtime.CreateWorkflow(typeof(CustomerWorkflow));
instance.Start();
B. WorkflowRuntime runtime = new WorkflowRuntime();
runtime.StartRuntime();
ManualWorkflowSchedulerService scheduler =
?runtime.GetService<ManualWorkflowSchedulerService>();
WorkflowInstance instance =
?runtime.CreateWorkflow(typeof(CustomerWorkflow));
scheduler.RunWorkflow(instance.InstanceId);
C. WorkflowRuntime runtime = new WorkflowRuntime();
ManualWorkflowSchedulerService scheduler =
?new ManualWorkflowSchedulerService();
runtime.AddService(scheduler);
runtime.StartRuntime();
WorkflowInstance instance =
?runtime.CreateWorkflow(typeof(CustomerWorkflow));
instance.Start();
D. WorkflowRuntime runtime = new WorkflowRuntime();
runtime.StartRuntime();
DefaultWorkflowSchedulerService scheduler =
?new DefaultWorkflowSchedulerService();
runtime.AddService(scheduler);
WorkflowInstance instance =
?runtime.CreateWorkflow(typeof(CustomerWorkflow));
instance.Start();
Answer: A
Microsoft examen certification 070-504 070-504
NO.6 Question
A custom activity defined in an assembly named LitwareActivities is defined as follows:
Namespace LitwareActivities
Public Class WriteLineActivity
Inherits Activity
Protected Overrides Function Execute(ByVal executionContext As
System.Workflow.ComponentModel.ActivityExecutionContext) _ As
System.Workflow.ComponentModel.ActivityExecutionStatus
Console.WriteLine(Message)
Return ActivityExecutionStatus.Closed
End Function
Private aMessage As String
Public Property Message() As String
Get
Return aMessage
End Get
Set(ByVal value As String)
aMessage = value
End Set
End Property
End Class
End Namespace
You need to create a sequential workflow where the execution path can be generated on the fly by an
application.
Which XML code segment should you use?
A. <SequentialWorkflowActivity
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/workflow"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</SequentialWorkflowActivity>
B. <Workflow
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/workflow"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</Workflow>
C. <Workflow
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
class:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</Workflow>
D. <SequentialWorkflowActivity
class:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</SequentialWorkflowActivity>
Answer: A
Microsoft 070-504 examen certification 070-504 070-504
NO.7 Question
You use a built-in tracking service to track specific workflow parameters.
You need to check whether the workflow parameters have been stored in the tracking database.
What should you do? (Each correct answer presents part of a solution. Choose two.)
A. Display the contents of the WorkflowInstance table of the tracking database.
B. Include the SqlTrackingQuery class in a code segment to retrieve tracked workflows and
SqlTrackingWorkflowInstance class to inspect them.
C. Use the ActivityTrackingLocation class to determine if the value has been set to a database.
D. Display the contents of the TrackingDataItem table of the tracking database.
Answer: B AND D
Microsoft examen certification 070-504 certification 070-504 certification 070-504
NO.8 You are writing a sequential console workflow that consists of a delay activity and a code activity, as
shown in the exhibit. (Click the Exhibit button for the sequential console workflow image)
In the execution code of the second activity, you try to modify the workflow as follows:
private void codeActivity_ExecuteCode(object sender, EventArgs e)
{
CodeActivity delay = sender as CodeActivity;
Console.WriteLine(delay.Name);
WorkflowChanges workflowChanges = new WorkflowChanges(this);
CodeActivity codeActivity = new CodeActivity();
codeActivity.Name = "codeActivity2";
codeActivity.ExecuteCode += new EventHandler(codeActivity2_ExecuteCode);
workflowChanges.TransientWorkflow.Activities.Add(codeActivity);
this.ApplyWorkflowChanges(workflowChanges);
}
private void codeActivity2_ExecuteCode(object sender, EventArgs e)
{
CodeActivity codeActivity = sender as CodeActivity;
Console.WriteLine(codeActivity.Name);
Console.ReadLine();
}
You also have set the modifiability of the workflow to a code condition that is set to the following function:
private void UpdateCondition(object sender, ConditionalEventArgs e)
{
if (TimeSpan.Compare(this.delayActivity.TimeoutDuration, new TimeSpan(0, 0, 5)) > 0) {
e.Result = false;
}
else {
e.Result = true;
}
}
Which code segment should you use to handle the exception?
A. workflowChanges.TransientWorkflow.Activities.Add(codeActivity);
try {
this.ApplyWorkflowChanges(workflowChanges);
}
catch (ArgumentOutOfRangeException ex) {
Console.WriteLine(ex.GetType().ToString());
Console.ReadLine();
}
B. workflowChanges.TransientWorkflow.Activities.Add(codeActivity);
try {
this.ApplyWorkflowChanges(workflowChanges);
}
catch (InvalidProgramException ex) {
Console.WriteLine(ex.GetType().ToString());
Console.ReadLine();
}
C. workflowChanges.TransientWorkflow.Activities.Add(codeActivity);
try {
this.ApplyWorkflowChanges(workflowChanges);
}
catch (InvalidOperationException ex) {
Console.WriteLine(ex.GetType().ToString());
Console.ReadLine();
}
D. workflowChanges.TransientWorkflow.Activities.Add(codeActivity);
try {
this.ApplyWorkflowChanges(workflowChanges);
}
catch (OverflowException ex) {
Console.WriteLine(ex.GetType().ToString());
Console.ReadLine();
}
Answer: C
certification Microsoft 070-504 070-504 070-504 examen 070-504 examen
